Return to the Appliances Forum | Post a Follow-Up

 o
AnnaA and smv81261 please update us on GE induction range

Posted by TexasBear (My Page) on
Sun, Nov 18, 12 at 17:08

AnnaA and smv81261 was there a successful repair of the GE Profile PHS925STSS induction range. I read your posts from this summer where you were both having an issue with the front right burner going to HI on its own.

Would love an update on your satisfaction with this range and the repair.

I am planning on buying a induction range and appreciate your thoughts.

Thank you


Follow-Up Postings:

 o
RE: AnnaA and smv81261 please update us on GE induction range

I would also like to know about their PHS925STSS since the repair was done 6 months ago, and if that fixed the problem or not. At this point, since I'm in no rush, I'm waiting to see if/when the next GE Slide-in Induction will be out. My current GE Profile radiant heat smooth-top free standing range still works just fine and is about 8-9 years old. But I like the slide-in style better, so would replace with that.


 o
RE: AnnaA and smv81261 please update us on GE induction range

Have you looked at the E-lux slide-in? I have the free-standing one and love it. Haven't had any problems at all


 o
RE: AnnaA and smv81261 please update us on GE induction range

I apologize for not seeing this. I wasn't around much in November and December and haven't been in the appliance forum for awhile. I bet these are old questions now.

The company that manages GE repairs was very responsive. They changed the entire mother board in the cooktop... Forget the parts names. It has not had a problem since. Everything is great! I took pictures of the operation and will dig them up and post a few.


 o
RE: AnnaA and smv81261 please update us on GE induction range

Ok, hopefully these 3 pics are helpful to fauguy or another person who was interested in these images a few months ago.


 o
RE: AnnaA and smv81261 please update us on GE induction range

The four white disks are the induction units. The 5th brown/tan one is the 'warming' circle which is a radiant unit. And I don't mean shiny.


 o
RE: AnnaA and smv81261 please update us on GE induction range

AnnaA,

Thanks for the update and the pics! I'm glad to hear they got the problem resolved with the front-right burner jumping from a lower setting up to High on its own, and that the problems hasn't returned. I read a few other reviews on the GE Site of people having the same problem, but none stated if it got fixed. Sounds like a bad batch of control boards, and the replacement boards are OK. I'm still not sure when I'll replace my GE Profile radiant smooth-top with an induction, as I think I'd rather first replace the KitchenAid counter depth side-by-side with the new GE Profile counter depth french door (PYE23PSDSS, or Cafe CYE23TSDSS).


 o
RE: AnnaA and smv81261 please update us on GE induction range

I've only had my GE Profile Induction range PHS925STSS for about a week, but all I can say is AMAZING! I had electric before, and for various reasons did not want gas - I am so happy with this range ! The induction cooktop is wonderful - water boils so quickly, everything cooks so evenly, and you can control the heat so well. Takes a bit getting used to. As for the "buzzing" noise some people complain about - this is a very low buzz when the element first gets turned on, then after you put on your pan and start cooking, I don't hear anything. Please do not negate buying this stove for that reason .
The oven is terrific - big (5.3 cu.), cooks very evenly (so far). The only caveat is that when you open the oven door at a high temp., (maybe over 400F) is very hot - so be careful. Just stand back a bit and open the door slowly.
Clean up of the cooktop is a breeze - I use one of the cream cleansers for glass cooktops, buff with a paper towel and then if need be I use Perfect Glass spray (from Bath Bed and Beyond).
I never had a warming drawer before, and although it is down low, I used it the other night when I had a big dish of roasted veggies to keep warm while I baked some halibut in the oven. It was really nice - just keep them warm. Perfect.
I would highly recommend this terrific range. So glad I went induction!


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Appliances Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here