|
Thu, Nov 8, 12 at 13:53
| I have a toploading GE clothes washer model wksr2100t. It has been leaving the clothes wet, so I watched it cycle, and it did spin great during midcycle removing all excess water from the clothes, but it did not spin at the end of the cycle. When I turned the knob and moved it back to the part of the cycle where it had spun, it wouldn't spin again for me. I do hear the motor running at the time, but the tub just doesn't spin. The lid switch seems to be working as I do hear the motor go on when I close the lid. My question is whether this is typical for a clutch problem or is this more likely to be a timer or other electrical problem. Thanks for any help. |
Follow-Up Postings:
|
- Posted by weedmeister (My Page) on Thu, Nov 8, 12 at 15:06
| Ask on the Laundry forum. |
|
| You might try this. It seems as though my machine has gotten sensitive to uneven loads and will not spin at the end-just runs. This seems to get it back on track for awhile at least. I don't have any problem with agitation and my machine is not this model. I do it a little quicker than she does. |
Here is a link that might be useful: GE reset
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Appliances Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.