|
| I followed the directions to take it off but we tried everything to put it back on almost all day yesterday. I even called Electrolux to help. I followed the manual directions that stated to take the door off then, do the directions in reverse but, it did not work!!
Tried it again this morning and it went right on. hold the door at the same angle (45) that you removed the door. Put the brackets into the oven slots and then bring the door DOWN to a full open positions. It will then allow the brackets to seat into the wall oven. Now re-lock the brackets and close the door. I was so excited to finally have the door on, yayyyyy!!!!! |
Follow-Up Postings:
|
| Good job! Another tip is to check Youtube for a demo or DIY video if some things don't seem to match the instructions. It may not have your exact range and exact procedure needed but it may offer insight to what are the usual steps. One word of caution re Youtube: the disassembly of lightweight stainless clad oven doors to do work inside them |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Appliances Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.