|
| I'm wondering if any one else has had experience with the wolf microwave drawer.
Ours was to be installed in a flush installation but due to a mistake made by our cabinet maker the cabinet wasn't big enough to contain it so we tried a standard installation. The grille at the bottom was rediculously sharp on the corners. The cabinet installer suggested he grind the edge down to solve the problem but really...grind...down...my...overpriced...microwave...oven. No. I called and they send they would send a replacement part in about 2 weeks in case it was defective because no one has ever complained about this before. I'm very disappointed in the sharp corners of the grille.
|
Follow-Up Postings:
|
- Posted by francoise47 (My Page) on Wed, Oct 24, 12 at 11:27
| We have the Wolf microwave drawer. We did not do the inset installation because it is on the back of the island in a position that is not very visible. In the year that we've had the microwave drawer |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Appliances Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.