Return to the Appliances Forum | Post a Follow-Up

Replacing brush roller belt

Posted by mrsgym (My Page) on
Sat, Jun 29, 13 at 16:45

I have a Hoover Platinum collection cyclonic bagless upright, model #UH70015. The brush roller belt needs to be replaced, as it's stretched out. I have removed the plate over the brush roller, but I can't get to the other side of the belt, as it's under a plastic plate that doesn't have screws. The manual doesn't show how to replace the belt(how weird is that). I emailed Hoover, but haven't heard from them as of yet. I've replaced belts before without a hitch on my past vacuums. Help is certainly appreciated.

Follow-Up Postings:

RE: Replacing brush roller belt

These You Tube videos should contain something to help.

Here is a link that might be useful: Belt change

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Appliances Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here