Return to the Appliances Forum | Post a Follow-Up

 o
Fisher & Paykel Dish Drawer Question

Posted by cal_quail (My Page) on
Wed, May 14, 14 at 20:39

Do they display that the load is clean? I've looked at the manuals online, but have been unable to find an answer.

My previous dishwasher (Kenmore of some kind) had a clean light that stayed on until you opened the door after it'd been run. My current one (Samsung) has a light for a short time, which then goes off. It took some getting used to, as we don't run the DW all that often with just the two of us. And with rinsing, sometimes you have to pull a couple things out to tell if it's been run.

We were not going to replace the Samsung in our impending kitchen reno, but now we're considering it and we're thinking of the DDs since we'd be likely to run one more often. As long as we're considering it, I'd love to know if they've got a clean light. It would seem it might be even more important with two DWs than with just one.


Follow-Up Postings:

 o
RE: Fisher & Paykel Dish Drawer Question

My DD603 (10 years) indicates a clean plate icon, or 00 (I don't much pay attention to what's there) on the LCD badge after a cycle ends, until the drawer is opened or Power is pressed.

The integrated models (without LCD) may not have an indicator.


 o
RE: Fisher & Paykel Dish Drawer Question

One more reason not to rinse dishes!! Just scrape them. :)


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Appliances Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here