Return to the Appliances Forum | Post a Follow-Up

 o
another kitchenaid no start, no power

Posted by gratefulgary (My Page) on
Thu, May 30, 13 at 11:57

I have a KitchenAid model KUDP01ILBL. One day it worked fine, the next, not so much. The last time I ran it, it seemed as though the dry cycle did not complete. There are none of the usual lights on the outside of the door lit, as though it is not getting power.

There is, however, 120 V across the two leads attached to the connector just above the circuit board. There is a relief in the board to accommodate the connector. I also recently replaced the soap dispenser.

Any ideas?


Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Appliances Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here