Return to the Appliances Forum | Post a Follow-Up

 o
? for Elux Speed Oven Owners

Posted by sarends (My Page) on
Fri, Apr 20, 12 at 22:37

We have a cabinet with outside dimensions of 29.25"

We would love to install the Elux High Speed oven over the top of an Elux wave touch oven. The speed oven specs say:

cutout width 22 3/8 - 22 7/8
This works fine for our cabinet.

However, the Elux Speed oven looks like it has a front plate that is 30" wide (event hough the oven itself is much narrower than 30"). Obviously this would more than cover the face of our 29.25" cabinet (by 3/4"). My question - could the front of the unit be cut narrower, specifically we would cut it back by 3/8" on each side.

I hope I am making sense. Thanks!


Follow-Up Postings:

 o
RE: ? for Elux Speed Oven Owners

Did you find any specs for the "Face place" kit on the Elux web site, that might give you more specific actual sizes for that piece of it, it is sold separately (I think) from the main unit.

Here is a link to one of the PDFs for specs, looks like their face plates might be included:

PDF LINK

Phil

Here is a link that might be useful: PDF Link


 o
RE: ? for Elux Speed Oven Owners

philwojo,

From the looks of the pdf, and from what I can tell, there doesn't seem to be a trim kit - it looks like the trim is attached to the microwave (perhaps) permanently. That is why I was curious if the face plate might be able to be trimmed. Thx


 o
RE: ? for Elux Speed Oven Owners

I would agree with that, but I think in that PDF it shows the exact specs so at least you can see the exact measurements.

I don't know if that PDF is for the model you are looking at so keep that in mind.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Appliances Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here