Return to the Appliances Forum | Post a Follow-Up

problem with my Vent-a-hood

Posted by eric335530 (My Page) on
Mon, Apr 1, 13 at 19:40

i have vent-a-hood b100 installed in my house. it's been working perfectly.
until last night i tried to clean it. i unsnap the two latches that hold the fan box in place to the rear of the exhaust hood housing, clean the fan box and put it back.
then today it doesn't turn on any more. i move the switch, nothing happen. i took down the fan housing again and carefully inspected, didn't find any elec in the fan housing i could break.

any idea and help? greatly appreciated.

Follow-Up Postings:

RE: problem with my Vent-a-hood

you prob. wiggled loose the elect connector - which is behind the fan.

fan should be held in with a couple of screws.

I assume the lights still work ? If not check the breaker in the panel.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Appliances Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here