Return to the Appliances Forum | Post a Follow-Up

Under Cabinet Vent Hood Advice

Posted by atct86 (My Page) on
Tue, Apr 9, 13 at 11:57

I was wondering if anyone can help me pick a stainless steel vent hood. It needs to be under cabinet, due to a damaged tin ceiling behind cabinets.

I plan on buying a 30" Viking range, so 600+ CFM would be very nice, as would 36".

Should I just get a viking hood and blower? Are there any better or cheaper options?

Would any be able to vent down into the basement, and outside, through a 2x4 wall?

Follow-Up Postings:

RE: Under Cabinet Vent Hood Advice

Mine is vented down to the basement, across the basement ceiling and out the foundation of the house. It's not ideal - I lose suction by having all those turns and that long run - but it's fine. I started with a 720 rated hood, so it's still good, even diminished, and I don't often run it on high anyway. Mine is a Kobe 36" under cab SS hood. You can check out their web site below. They are quiet. Mine has baffles and is easy to clean. They have lots of styles, so you can look through them and see if any appeal to you or go with the style of your kitchen. I got mine from for over $900, but I don't know if that's much less than a Viking. HTH

Here is a link that might be useful: Kobe Hoods

RE: Under Cabinet Vent Hood Advice

I am also really enjoying my Kobe under cabinet vent hood. Rated up to 720 but I usually run it on "quiet mode" which you can truly hardly hear. It is pretty too- nicer fit and finish than some other brands we considered.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Appliances Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here