|
Thu, Mar 15, 12 at 12:45
| Had to have the Sears repair man out to fix our double ovens this week. They are Kenmore, but made by Electrolux, so he tells us. After I ran the self clean cycle, the top oven no longer heated. He says this is a very common problem, and some part (?) needed to be replaced. He went ahead and replaced the same part on the lower oven, too. He also mentioned that these ovens need a 30 amp breaker, not the 20 that is commonly used.
Just thought I would mention it if you have one of these ovens. |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Appliances Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.