|
Tue, Feb 14, 12 at 21:23
| I have a Maytag JetClean dishwasher that was purchased and installed in July 2011. It's the type that fits inside a cabinet slot. At the end of November we started to notice a little rippling on the bottom of the side cabinet that houses the unit. Now there's a large light black mark in the MIDDLE of the cabinet and the wood at the bottom of the cabinet is black and ruined. The hardwood floor is fine. The unit has a vent on the top front, so that particular vent isn't an issue. Had the factory service folks come out under warranty to fix this problem. Ran diagnostics and pulled dishwasher out and tested it. Couldn't find anything wrong. We had a new GE dishwasher there prior for 3 yrs. and this was never an issue, the panel was pristine. Anyone have a similar problem? BTW- the dishwasher works really well! Ruining the cabinet - not so great! |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Appliances Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.