|
Mon, Feb 13, 12 at 6:55
| I just took delivery of a KA counter depth refrigerator to be installed in my new kitchen. The water lines protrude in the back about a half inch prevention a perfect fit. My contractor says he can't bump out the back of the cabinet. I am using panels on the front so this ruins the whole look.
Any suggestions? And why don't they include water lines in the spec. |
Follow-Up Postings:
|
| Are you talking about a counter depth fridge or a built-in fridge? Counter depth is a misnomer - the door will always stick out beyond the counter so they can open. Only integrated built-in fridges can be made flush with the other cabinets. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Appliances Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.