Kithchen faucet hole drill off center in granite

whattadoDecember 13, 2012

We are in the middle of getting new granite counter tops and it has been a complete nightmare. We used prefab granite and when contractor installed it the second piece is higher than the larger side. He said he is going to buff it down. UGGG BUT a even bigger problem is that he drilled the faucet hole and it is not centered. It is off about 1/4 of an inch. Is there anyway to have him cut the circle a little bit more to the left and fill the wrong side in? If anyone has any suggestion I sure would appriciate it.
Thank you!

Thank you for reporting this comment. Undo

Usually there is some wiggle room, when you actually put the faucet in you should be able to move it if its just 1/4 inch.Try placing it in first.

    Bookmark   December 13, 2012 at 10:18AM
Thank you for reporting this comment. Undo

unfortunately anyone working with prefabs is not a real fabricator and problems like yours are common. prefabs are cheap but you get what you pay for.

    Bookmark   December 13, 2012 at 10:41AM
Sign Up to comment
More Discussions
Strategies for washing dishes in a large single sink vs double sink
Hi all, We have in our plans to get a large (33 inch)...
"Ledge" sinks and accessories -- do you use them?
I'm considering an undermount stainless sink that has...
KitchenCraft - will they last a lifetime?
Fell in love with a specific painted door when cruising...
Anyone used solid surface backsplash with granite countertops?
I am considering doing full backsplash in Corian (or...
Carol Vesier
Baker Cherry Shaker doors vs IKEA Laxarby doors
Please advise on Baker doors. I am going to get IKEA...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™