how to add brass to a kitchen-mixed with stainless?

heidiaNovember 20, 2012

I really love this faucet in the bronze color:

http://www.deltafaucet.com/kitchen/details/9159-cz-dst.html

To work it into my kitchen...can you help me with design?

Okay, lower cabs are walnut shaker. Upper are white shaker. Backsplash is basic glazed white 3x6 tile with a soft gray grout. Counter is going to be something like white quartz/marble look alike. All appliances are stainless. 36 inch wolf range. The hardware...I am set on hickory hardware studio line in polished nickel. I cannot find a bronze color that has the same profile as these. I want to keep the hardware the polished nickel...

so...how to incorporate this bronze faucet with the nickel hardware and stainless appliances?

I am thinking of having the pot filler be bronze as well, like this one.

http://www.efaucets.com/detail.asp?Product_Id=ES8103DL

And then having pendant lights that are brass like these:

http://pinterest.com/pin/120400990009145167/

http://southernhospitalityblog.com/wp-content/uploads/2011/11/kitchen22.jpg

So stainless appliances, nickel hardware, brass faucet, pot filler, pendants...would that work?

Any other ideas on how to add brass/incorporate brass into a stainless mix? thanks!

Thank you for reporting this comment. Undo
heidia

This is the hardware from hickory that i love...eta to say that it does have 2 bronze finishes, but they are both way too dark...I love the look of the nickel: http://kitchendesigndiary.blogspot.com/

And, yes, I am using brass and bronze interchangeably. I am sorry. I just mean that pretty color of the trinsic faucet-not shiny yellow brass, not oil rubbed bronze, that inbetween color...

    Bookmark   November 20, 2012 at 11:53AM
Thank you for reporting this comment. Undo
grlwprls

My primary concern would be that the champagne bronze faucet and the (cant remember now) color name of the pot filler are two entirely different colors/metal finishes. In my last kitchen, I had flat black (rasped iron) hardware on cream inset cabinets with stainless appliances (range had brass trim) and my tap and pot filler were both uncoated brass. The lights were ORB because that was the lighting scheme for the entire house. The cabinet hardware was black because all the hardware in the house was black. The faucets were just because I love *real* brass and it looked great.

    Bookmark   November 20, 2012 at 2:15PM
Thank you for reporting this comment. Undo
heidia

What if I could coordinate faucet and pot filler? I almost surmise delta will update the pot fillers to include that finish...

    Bookmark   November 20, 2012 at 3:38PM
Sign Up to comment
More Discussions
Prep sink location
After a lot of talking on another thread, I took sena01...
Jennifer Weinman
Kitchen colors....need something happy and vintage :)
I want to try to go a bit vintage with my low-dollar...
lavender_lass
Has anyone bought from Builders Depot Direct.com?
I was looking for marble subway tile and came across...
pebbles81
Neolith polished Classtone?
Has anyone seen any of the new neolith classtone surfaces...
nels1678
Kohler Stages Sink: review after 6 weeks of use
There have been some threads here regarding the Kohler...
rjr220
Sponsored Products
Trademark Global 14 in. Vintage Chicago Blackhawks NHL Neon Wall Clock NHL1400-C
$80.97 | Home Depot
Fima by Nameeks S3407 Single Handle Kitchen Faucet - S3407CR
$704.92 | Hayneedle
David Bromstad Set of Two Chevron Hand Towels
Grandin Road
Schonbek Equinoxe 29-Light Flush Mount Light
LuxeDecor
Pre-owned Ethan Allen French Country Dining Chairs - S/4
$999.00 | Chairish
Homelegance Oldsmar 7 Piece Dining Room Set in Dark Oak
Beyond Stores
Maverick Black Flip Tip Instant Thermometer
Overstock.com
simplehuman Paper Towel Holders Quick Load Countertop Paper Towel Holder in
$21.97 | Home Depot
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™