Hardware Spacing?

sawyer212October 7, 2012

Hi all...I'm a long-time lurker, but first-time poster! Hoping you can help me with a few questions. We just had our cabinets installed, and I purchased the RH 4" Gilmore Pulls for all drawers, and the RH Gilmore Knobs for all cabinets. My contractor wants to install them on Tuesday, and I need to tell him how I want everything spaced, which leads to my questions! :)

1) For those of you with the Gilmore pulls, did you center the pulls vertically to the screws? Or to the middle of the pulls?

2) For the drawers that are larger than 30", I went with two pulls (per the advice I read on here!), but how should they be spaced horizontally? Specifically, I have a few 33" cabinets...where should I place them?

Thank you in advance for your help!

Thank you for reporting this comment. Undo
lisa_wi

I don't have the gilmore pulls, but mine are similar. Take a look at my photos and let me know if you want info on the spacing on the drawers. I can measure. The drawers by the refrigerator are 27" and 30". Vertically I centered the screws on the drawer, not the pull.

Here is a link that might be useful: my finished kitchen thread

    Bookmark   October 7, 2012 at 7:22PM
Sign Up to comment
More Discussions
Wolf oven error on self clean: TCO detect as open
I've had two Wolf E series for nearly 2 years (single...
repac
Kitchen Plan... getting closer!
I wasn't pleased with the idea of having to separate...
Dietitian
Walnut slab for island with sink
We are building a home and I am considering using a...
sherry0117
Small Kitchen Reveal - Complete with total redo of the plan during!
It was hard to even begin to post since my kitchen...
lurkerlisa
Unsealed leathered Virginia Mist?
My Virginia Mist/Jet Mist counters are installed and...
juliedrew
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™