Ceasarstone installation

sjhockeyfan325September 24, 2013

Does 3 cm Ceasarstone need a plywood underlayment?

If you're using 2 cm Ceasarstone (or similar), then how do you keep the thin-looking edge like this one if it has to sit on a plywood base?

Thank you for reporting this comment. Undo
kaysd

We used 2 cm quartzite and had the cabinet makers built hard tops into the cabinets, rather than using a sheet of plywood on top.

    Bookmark   September 24, 2013 at 5:59PM
Thank you for reporting this comment. Undo
GauchoGordo1993

Does Ceasarstone provide a recommendation?

    Bookmark   September 24, 2013 at 6:08PM
Thank you for reporting this comment. Undo
babyfish00

For my peninsula, I don't have any plywood underneath the 1 1/4" Caesarstone countertop. Hope the pictures here will give you some ideas.

Before CT installation:

Note there is 14" width hanging over on the other side (near the patio door)

    Bookmark   September 24, 2013 at 10:57PM
Thank you for reporting this comment. Undo
blackchamois

I did a mitered edge which makes the slab look thicker. My edge is 1.5".

    Bookmark   September 25, 2013 at 12:00AM
Thank you for reporting this comment. Undo
sjhockeyfan325

Babyfish, OT (but it's my thread :-) ), can you tell me the brand and style of your door and drawer pulls? They're the low-profile that we're looking for.

    Bookmark   September 25, 2013 at 12:58PM
Thank you for reporting this comment. Undo
gwlolo

My cabinet maker inset the hardtop into the base cabs. I had the slab installed directly on the base cabinets (soapstone).

    Bookmark   September 25, 2013 at 1:21PM
Thank you for reporting this comment. Undo
babyfish00

sjhockeyfan - I'm in the process of seeking legal action to sue my cabinet company and I have another thread talking about my pain in the same forum, so I am not appropriate to disclose their name here. Sorry!

    Bookmark   September 25, 2013 at 2:01PM
Thank you for reporting this comment. Undo
babyfish00

sjhockeyfan - I'm in the process of seeking legal action to sue my cabinet company and I have another thread talking about my pain in the same forum, so I am not appropriate to disclose their name here. Sorry!

    Bookmark   September 25, 2013 at 2:02PM
Sign Up to comment
More Discussions
I think my quartz sample is trying to drive me crazy
We had settled on PentalQuartz Carrara for the island...
lisa_a
New to Kitchens? Read Me First!
Welcome! If you are new to the Kitchens Forum, you...
buehl
RH Aubrey pulls anyone? Measurements?
The space between our smaller drawers for pulls is...
brodyt
Help needed with this beam!!!
We had part of a wall taken down in the kitchen &...
mark_rachel
Please help with Kitchen floorplan
Hello everyone, My husband and I are building a new...
mary8153
© 2015 Houzz Inc. Houzz® The new way to design your home™