Recs for 48" chimney stack hoods

CT_NewbieSeptember 20, 2013

We ended up going with a 48" Wolf with griddle. The appliance store said we could use a 48" hood and didn't need to go to 52" Unfortunately, some of the recs we got when we thought we would have a 36" won't scale to 48". We really liked the Zypher Anzio. However, it only goes up to 600 CFM. We were thinking we needed 1K cfm.

We looked at the Best K424855 but it seems a bit clunkier. We like the Imperial but DH would prefer slightly less modern and more transitional like the Anzio. We decided on internal blower

Thanks so much!

Thank you for reporting this comment. Undo

Anyone with suggestions? Just to clarify, I mean 48" wide.

    Bookmark   September 23, 2013 at 4:18PM
Thank you for reporting this comment. Undo

We have a 48" Wolf with griddle and went with a 54" hood. We ended up getting the Thermador one b/c we got a great deal on it from an appliance outlet.

So, I'm no help...

    Bookmark   September 23, 2013 at 5:02PM
Thank you for reporting this comment. Undo

Kobe hoods give a lot of bang for the buck. You want baffle filters, and I agree 600 cfms is not enough since you have a griddle. There's also the Wolf hoods if you want to spend more.

Make sure your exhaust duct is big enough. It should be 8" or 10" diameter depending on the hood you choose.

Here is a link that might be useful: 48-inch Kobe Hoods at AJMadison

    Bookmark   September 23, 2013 at 6:46PM
Sign Up to comment
More Discussions
Unusual granite
I have searched for other pictures of this granite....
Soapstone with runnels: How are they holding up?
If you have runnels in your soapstone, could you tell...
Viatera Minuet
Hello! I am about to start a kitchen remodel and I'm...
The perfect pad for a kitchen runner!!
I use a 12' long runner in my kitchen. It is an old...
The Kitchen Designer Landscape
There seems to be a few scenarios out there. Some I...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™