Viking D3 counter depth frig - not flush with cabinets??

Ellen1234July 17, 2013


I just had a Viking D3 counter depth frig installed yesterday. The cabinetmaker had made the frig panel 24" deep per the Viking specs. I had also called Viking about where to place the outlet so the frig would be as far back as possible. They told me 7" from the floor which is what the contractor did.

Well, turns out the frig still sticks out a bit so you see the grey side. The contractor said there is no void in the back of the frig at all where the plug would recess into.

Anyone else have this issue and what did you do to solve it?


Thank you for reporting this comment. Undo

I have a similar Viking Pro with a 24" deep cabinet. We used a "recessed outlet" to keep the plug flush into the back wall. If you have a water line, you will need to also take care with that as well.

Here is a link that might be useful: Example, Available from Many Vendors

    Bookmark   July 17, 2013 at 2:44PM
Sign Up to comment
More Discussions
Do I need an architect?
I have posted before about wanting to remodel my awful...
Advice on first draft of kitchen layout
One change already is I may go with a cooktop, micro/convection...
Left/Right/Center & Related Hand & Fauet Questions
I've searched & read countless threads here over...
Carrie B
Conestoga people, how did you do glass cabs? They don't do glass?
We were getting an estimate for some bar cabinetry,...
The Kitchen Designer Landscape
There seems to be a few scenarios out there. Some I...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™