Do you match cabinet hardware to faucet, etc.?

vjobrockJuly 3, 2009

The cabinet hardware that fits best with my cabinets is an antique rust - brownish with some black highlighting. Does my kitchen faucet need to be oil rubbed bronze then? And if so, won't a stainless steel sink look funny with anything but a stainless faucet? But my appliances are SS. My lighting fixtures are an antique bronze. What is the rule for matching/not matching kitchen finishes??? If I'm going with a SS sink then must the faucet be SS and then should the cabinet knobs/pulls be a stainless finish?

Thank you for reporting this comment. Undo
idrive65

As Stacy and Clinton say, "different pieces [of clothing, in their case] don't have to match, they have to go." Stainless is a neutral. I see knobs/pulls as "jewelry" that don't need to match your neutrals. If you are worried about ORB with a SS sink, buy a cheap ORB faucet at HD to see if you like the color. (Then return it. Don't intall plumbing fixtures from HD) Or have you considered a dark colored silgranite sink?

    Bookmark   July 3, 2009 at 9:13AM
Thank you for reporting this comment. Undo
eastcoastmom

I am doing stainless undermount sinks , faucets will be satin nickel and hardware ORB. I had the same question as you- went through kitchen magazines and found examples of it done with similar cabinet and counter choices both ways. You can do the same thing or check out the finished kitchen blog right here on this forum. I figured out that I liked the unmatched faucet /ORB hardware look for my otherwise tone on tone kitchen - the stainless added just a little extra pop of texture and color. Already have stainless range and ovens , so the faucet does coordinate there, as well as with the sink.

    Bookmark   July 3, 2009 at 10:09AM
Thank you for reporting this comment. Undo
brunosonio

They don't and shouldn't match, it's too much in a kitchen. Don't be afraid to experiment, you might be surprised at what combinations work in your eyes.

I did the same as posted above...went to HD and Lowe's, bought cheap hardware, brought it home, taped it to the cabinet doors and tried different combinations. Not only can you try different finishes but you can try different styles.

I then returned everything for a refund. Just don't install them, keep the original wrappers, and be careful not to scratch anything. Once I found the combo I liked, I went online to find the cheapest price.

We went with chrome fixtures and brushed SS hardware. I actually found a $6 pull from Lowe's that I liked better than the $25 pull I was going to buy online and saved myself quite a bit of money!

Another thing I noticed...depending on how much metal is in your kitchen (backsplash, appliances, lighting, etc) you may find the hardware needs to co-exist with everything but your plumbing fixtures.

    Bookmark   July 3, 2009 at 10:47AM
Thank you for reporting this comment. Undo
sombreuil_mongrel

I used six different pulls/knobs/handles; I unified them with a single matching finish. I used the same finish on the faucets as well. I couldn't have things moving in too many directions. There are also three competing wood finishes in my kitchen. I think it's good if some thread is carried through, in my case it's polished nickel hardware. It could be some other "thread" for you.
Casey

    Bookmark   July 3, 2009 at 2:38PM
Thank you for reporting this comment. Undo
wildcat22

We are completing our new build house, will have walnut stained cabinets, ORB lighting fixtures, black finish hardware, Tropical Brown granite (pretty dark), SS appliances and sink, and ORB faucet. I had the same questions you did and we considered a silgranite sink, but it was just too dark in our dark granite, the SS sink is a nice accent to the counters. And I think the ORB faucet compliments the tones/colors/mood of our kitchen than another finish would. And the good thing is the faucet is relatively cheap compared to all those other features of our kitchen, so we can always change it out down the road if we want. We did see almost the identical kitchen in a model home and liked it all together.

    Bookmark   July 3, 2009 at 3:43PM
Thank you for reporting this comment. Undo
biochem101

In a word, no.

My hardware is pewter. I don't even know if they make pewter faucets. My faucet is brushed stainless.

    Bookmark   July 3, 2009 at 7:45PM
Sign Up to comment
More Discussions
Quartz or Dekton/Neolith?
I know all about the wonders of quartz countertops...
nadianyc
Cabs above the fridge and wall oven
We don't have a KD yet, and I'm still just figuring...
Jennifer Weinman
New to Kitchens? Read Me First!
Welcome! If you are new to the Kitchens Forum, you...
buehl
What does this tile say to you?
I am still in the planning stages of a small, U-shaped...
kelleg69
Need advice on how to remodel this corner of kitchen
Hi all Just purchased a home and does not have budget...
strikeraj
Sponsored Products
Casablanca Dual-Light Arch. White Ceiling Fan Center-Stem Fixture with Glass Lig
$74.00 | Home Depot
Radia Wall Mounted Fireplace - NF-W4RAA
$299.00 | Hayneedle
24'' T Vintage Marquee Light
$139.99 | zulily
Stone Mill Oil Bronze Rope Cabinet Hardware Knob (Pack of 10)
Overstock.com
Opis Honey Onyx Oval Vessel Sink
Signature Hardware
Cafe Ole Giclee Set of Four Shades 3x6x5 (Clip-On)
$49.99 | Lamps Plus
Schonbek | Vertex Pendant Light - VR0810
YLighting
Ivory Pearl Flower Silk Bell Shade 2.75x5x4.75 (Clip-On)
$49.91 | Lamps Plus
© 2015 Houzz Inc. Houzz® The new way to design your home™