Wood counter top pricing?

PattyjillJune 16, 2013

I love the look of a dark walnut bar top for my kitchen but don't want to get too excited until I figure it in the budget. Does anyone know the pricing per square ft on say a 2" thick walnut counter?

TIA
Patty

Thank you for reporting this comment. Undo
sombreuil_mongrel

Price is just one factor. Shipping can be significant. Finding a fabricator within a few hundred miles will save on the freight.
I ordered from these folks three times, they make a nice wood top, and they are very accommodating.
Casey

Here is a link that might be useful: Hardwoodlumber.com

    Bookmark   June 16, 2013 at 4:09PM
Thank you for reporting this comment. Undo
writersblock

You can also easily figure it out, including shipping, at craft-art:

Here is a link that might be useful: craft-art diy pricing

    Bookmark   June 16, 2013 at 5:32PM
Thank you for reporting this comment. Undo
j_hack

I looked at Craft Art also but found other places as well. Like mongrel said, shipping can be high. One quote I got was $250ish. Which seemed high as it was just coming from the state next door. I am in Ohio for example.

If you say where you are you may get some ideas of more local places.

    Bookmark   June 16, 2013 at 7:00PM
Thank you for reporting this comment. Undo
ArlingtonVAremodel

You can get an online quote from cafecountertops.com, which is where we ordered our 82 inch by 52 inch 40 mm (1.58 inch) thick walnut island top. We worked through a local lumber company for a number of reasons, but the wholesaler will email you a quote based on specs you input.

Here is a link that might be useful: Cafe Countertops

    Bookmark   June 16, 2013 at 8:28PM
Thank you for reporting this comment. Undo
cookncarpenter

I built my own tops, but ordered the 2-1/4" thick Mesquite material from William Rogers, absolutely gorgeous!
I would imagine all their other species are just as nice...

Here is a link that might be useful: Custom wood countertops

This post was edited by ctycdm on Mon, Jun 17, 13 at 9:44

    Bookmark   June 16, 2013 at 10:56PM
Thank you for reporting this comment. Undo
mrsmortarmixer

You could also talk to local cabinetmakers and woodworkers. They can usually get anything you need lumber wise. You will also most likely save quite a bit of money since you wouldn't be paying for overhead or shipping.

    Bookmark   June 17, 2013 at 1:01AM
Sign Up to comment
More Discussions
Banquette as only dining area?
I apologize for starting a banquette thread again but...
vdinli
WHITE cabinets with WHITE Bertazzoni range??
In the planning stages of a major kitchen reno. I've...
enzaenza
How much has your Danby Marble countertops scratched?
Still looking for he holy grail of countertops… back...
Pippin
Need floorplan advice/help
Hello everyone! Looking for floorplan advice on our...
K L
White on White & other (mis) Matched Kitchens
I was at a friend's house, an artist, last week showing...
Carrie B
Sponsored Products
Homelegance Crown Point 7 Piece Counter Height Dining Room Set
Beyond Stores
ELK Lighting Farmhouse 65060-1 Pendant - 8W in. - Bellwether Copper - 65060-1
$222.00 | Hayneedle
GE Under Cabinet Lighting 18 in. Direct Wire LED Under Cabinet Light Bar with
$59.97 | Home Depot
Olde Thompson 16-jar Orbit Spice Rack
Overstock.com
EdgeStar 80 Can Built In Beverage Cooler
Overstock.com
Cube Satin Nickel Frosted Glass Tech Lighting Mini Pendant
Euro Style Lighting
33" Aberdeen 60/40 Offset Double-Bowl Copper Farmhouse Sink
Signature Hardware
Fresca Allier 48 Wenge Brown Modern Bathroom Vanity w/ Mirror
Hudson Reed
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™