Fan Rated Box

mike_kaiser_gwNovember 20, 2013

I've looked and haven't found one but before I give up, I'm wondering if anyone makes a 4" square fan rated box? The reason I ask is the neighbor has a old fan in his garage hanging from an ordinary 4" steel box and the fan needs to be replaced. I mentioned that it might be a good idea if he used a fan rated box. One little problem, the current box has 3 pieces of conduit going into it. One from the top and two from the sides, so it would be a lot easier if everything lined up nice and neat.

Thank you for reporting this comment. Undo

The fan can be supported independently from the box. If the fan has a mounting strap that projects past the edges of the box, long screws into the structure above can be installed in the strap just outside the box. That is not the only way but it might work for his situation.

    Bookmark   November 20, 2013 at 9:08PM
Sign Up to comment
More Discussions
Help with 240V 50A location
I'm trying to do a challenging kitchen layout. I will...
Doorbell goes off by itself.
Can anyone tell me why this would happen? It's a wired...
Need help Replacing old dimmer that used only 2 wires in a three way
I need advice as to which wire to connect to which...
Multiple Fluorescent Ballasts in one light fixture
Hello GardenWeb. I'm not new here, but couldn't log...
ARGH! no boxes
Went over to my daughter's house to help them change...
Ron Natalie
© 2015 Houzz Inc. Houzz® The new way to design your home™