Help wiring combo switch/outlet and additional switch

Mark3402July 14, 2014

I am replacing a switch and combo switch/outlet in a half bath. there is a single switch that controls a light and a combo with the switch controlling an exhaust fan and the outlet has constant power. The original fixtures were removed before I saw it so I have no way of knowing how it was wired

there is a wire coming from the fan and both black and white lines are hot there's also a wire coming from the light and only the white wire is hot
I'm usually decent with this type electrical, but this ones a bit aggravating...
can someone please help
thnks
Mark

Thank you for reporting this comment. Undo
jreagan_gw

How did you determine that those wires where hot?

Have you opened up the light/fan to see how that is wired up?

    Bookmark   July 14, 2014 at 10:55AM
Thank you for reporting this comment. Undo
Mark3402

With a digital meter and yes

    Bookmark   July 14, 2014 at 6:42PM
Sign Up to comment
More Discussions
Wiring in a 1 1/2" thick wall cavity
I need to run 12/2 wire thru an existing thin wall....
baker1mich
Confused & need help please
I know just about zero when it comes to electricity....
bicyclegirl1
Humming Transformer
Last summer the POCO replaced the transformer on the...
mike_kaiser_gw
Can I electrify battery-operated lights?
Hi all. Is there a way to electrify a battery operated...
eam44
Please Critique Low-Volt (Home Automation) Plan/Proposal
GW/Houzz Community, As always, I want to thank this...
Andrew K.
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™