Buy jig or reciprocating saw?

lzk4November 22, 2004

Hello,

We recently bought a home, and the need to get things done around the house are never ending. I need to get some minor framing done (cutting 2x4's), and I also need to cut some metal shelving brackets. I was thinking of getting a plain old hack-saw and another wood saw, but I thought I might as well get a powered (cordless or corded) one. But I can't decide between a reciprocating or a jig saw (or maybe handheld circular). Which of these is most versatile/useful one for light-duty housework? I want to buy just one power saw and get the most uses out of it. The guy at Lowes said buy a cordless jig saw, not reciprocating. Just wondering if other people had opinions/ideas?

Thanks

lzk

Thank you for reporting this comment. Undo
ericwi

There are special blades that can be fixed to a cut-off saw, for cutting metal. But the blades are expensive, so you will more likely end up using a hand-power hacksaw for your metal cutting. A corded(not battery) cut-off saw is perhaps the most useful tool, and they aren't very expensive.

To do good work, safely, will require a bench, or maybe some solid saw horses, on a level surface.

    Bookmark   November 22, 2004 at 9:51AM
Thank you for reporting this comment. Undo
gzec

I own a circular saw, recipricating saw, a table saw, a sliding compound miter saw and various hand saws.
If you are just starting out with electric saws and want to build your skills over time, I suggest a 7 1/4 " circular saw (corded). I would not suggest a recipricating saw, they can be very dangerous and not very precise.

    Bookmark   November 22, 2004 at 11:10AM
Thank you for reporting this comment. Undo
talley_sue_nyc

I have a jig saw, and it's OK, but a circular saw would be light years better for cutting straight lines in stock lumber. I needed a jig, for some small cuts, and didn't have room or money for two saws (and I live in an apt. , so I don't do much woodworking).

I've never figured out what a reciprocating saw is best for, but I'm betting it's stuff I'd never do.

If I lived in a home w/ a garage, I'd have a circular saw, a jig saw, and start saving up for a table saw.

    Bookmark   November 22, 2004 at 12:03PM
Thank you for reporting this comment. Undo
back_yard_guy

A circular saw, reciprocating & jig saw each serve a unique function. It's kind of like asking, should one use a fork, spoon or knife? They're not intended to accomplish the same task. There is no one tool that fits all projects. The wrong tool - for the wrong job - will do nothing but disappoint.

Reciprocating saws are really great for demolition activities (like tearing out before remodeling).

    Bookmark   November 22, 2004 at 12:46PM
Thank you for reporting this comment. Undo
lzk4

Thanks to all for your replies. While surfing some more, I found that Black and Decker makes a combination hand saw / jig saw called Navigator SC500. See Link. Seems to be exactly what I need, but it does seem underpowered. Any opinions?
Thanks
lzk

Here is a link that might be useful: Navigator SC500

    Bookmark   November 22, 2004 at 2:01PM
Thank you for reporting this comment. Undo
chiefneil

I had a B&D jigsaw once that was so underpowered and awful that I returned it. If you're going to get a jigsaw get a Bosch. I have a circular saw too but I actually hardly ever use it since I got the jigsaw. I'm planning on getting a reciprocating saw but that would be for the express purpose of demolition.

You should buy the tool for the job at hand. For framing I think I'd want a chop saw, but since you're on a budget and looking for flexibility the jigsaw and circular saw will also work. For the shelf brackets you can either buy a hacksaw or a metal blade for the jigsaw. And above all, "don't forget the most important piece of safety equipment... safety glasses" [Norm Abram].

    Bookmark   November 22, 2004 at 4:12PM
Thank you for reporting this comment. Undo
HandyMac

A circular saw will cut 2 by lumber and plywood faster and better than other saws.

A jig saw(technically it is called a saber saw) will cut shapes in thin wood/plastic/metal and can be used for plywood cutting.

A reciprocating saw is basically a demolition tool. There are not many construction uses for this type.

An inexpensive circular saw is the more versatile tool---on a limited budget. And an inexpensive jig saw and circ. saw can be purchased for under $70. However, you get a cheap saw on both accounts.

The suggested Bosch jig saw, for instance, is what most folks consider the Cadillac of jig saws---and retails for $150+.

My circular saw cost $189 six years ago, I got it in a closeout sale for $100. But I use it at least every week, on jobs.

B&D saws are decent homeowner tools. Get corded tho---the battery types are junk.

    Bookmark   November 23, 2004 at 5:29PM
Thank you for reporting this comment. Undo
lzk4

I checked out jig-saws and found them with and without orbital motion, scrolling feature etc. Are these features useful or necessary?
Also, is 3.5Amp sufficent?
Thanks again
lzk

    Bookmark   November 23, 2004 at 10:34PM
Thank you for reporting this comment. Undo
HandyMac

Orbital is good---makes the cutting more aggressive and faster. It does make more splintering, however.

Scrolling is more a blade size function. The saws with the top knob for turning the blade always were much more difficult for me to use---required both hands and two actions. It is easier to just tirn the saw.

3.5 amps is ok, jig saws are not designed for long cuts and speed anyway.

    Bookmark   November 23, 2004 at 11:57PM
Thank you for reporting this comment. Undo
mstrgrdnr

I second the vote for the Bosch saw.

It has proven to be worth every penny of the $160 that I spent on it. A bit pricey compared to others I guess, but it operates so smoothly and cuts so precisely.....man, what a saw.

Who knows, with the right tool you may find lots and lots of uses for it.

Aubrey

    Bookmark   November 24, 2004 at 4:09PM
Thank you for reporting this comment. Undo
DrynDusty

I have the circular, both corded and cordless, saber, mitersaw, reciprocating, and hand saws, plus an old radial arm saw and a band saw. (that's a whole lot of saws, now that I think of it!)
I use the reciprocating saw for tree pruning, and rough sawing, like taking apart pallets (just cut through the nails!)to reuse the wood. I've also used the recip for cutting a glass rod, 1 inch diam. with a carbide grit blade,which didn't work really smoothly, but it got through. It cuts metal like butter, too.
I used to use the jigsaw when I didn't have anything else and it worked OK, not great, though. Crosscutting boards with a guide, ripping boards is really slow and wavey. Can cut metal pipe.
Norm

    Bookmark   March 26, 2005 at 10:51PM
Thank you for reporting this comment. Undo
jrice

I would suggest if you are going to purchase a jig saw to get the variable speed model.

Each saw is usually designed for a special purpose and not a combination of purposes. Oh yea they will work but not very good.

As for B&D, They use to be a good brand, not anymore as far as I am concerned. Bought a B&D orbital sander and it lasted almost 2 minutes!! No more B&D for me!! Plastic fibre gears I think.

Circular saws are used for straight cuts.
Jig saws are used for short curve or (kind of) straight cuts.
Sawsall is for mostly demo work.
Compoumd mitre saw (CMS or SCMS) are for straight or compound mitre cross cuts.
Table saw is used primarily for rip cuts, however can be used for crosscuts as well.

So as you can see, a "good mulitpurpose saw" will probably not meet up to your expectations.

    Bookmark   March 27, 2005 at 9:26AM
Thank you for reporting this comment. Undo
darthjenn

I just about tore my hand off tonight with a wild Skill jigsaw while trying to cut straight lines into an aluminum threshold. As you can imagine, it didn't come out very well. I live in a condo and all I have is a foldable workbench. Damn thing was moving all over the place.

I can't wait to get a regular circular saw. I think it would be far more useful as I only seem to make straight cuts. I am not sure I could have used it on metal, though. Probably should have used a hacksaw tonight, but it takes me FOREVER to cut through anything with it, and I can't imagine how long it would have taken with metal.

What I should probably do is take a course on tool safety! Luckily my husband wasn't around to watch.

    Bookmark   March 30, 2005 at 1:58AM
Thank you for reporting this comment. Undo
chiefneil

Darthjenn - did you have a metal-cutting blade on the jigsaw? You need to use the right blade and reduce the speed and orbital action when cutting metal with a jigsaw. If you do those three things and take it slow, the jigsaw shouldn't be dancing all over the place like you experienced.

    Bookmark   March 30, 2005 at 3:55PM
Thank you for reporting this comment. Undo
darthjenn

Thanks, chiefneil! I used the metal-cutting blade, but I did NOT reduce the speed OR the orbital thing. I was WAY too impatient, pressing forward instead of letting the saw do the work. I am a new user of saws, definitely. I am fascinated by them. I just love having using my own tools.

I may have to make peace with the jigsaw, yet. My husband doesn't think it's a good idea for me to get a circular saw as he says it's too dangerous. Still, he hasn't used a circular saw in a good twenty years himself, since he moved out of the "country".

Perhaps they have new safety features now that they didn't have then. I hope so. Otherwise I won't be able to talk him into it. He loves all of my DIY adventures, but he's completely paranoid about my getting hurt.

    Bookmark   April 1, 2005 at 11:59AM
Thank you for reporting this comment. Undo
DrynDusty

Darthjenn, you just keep practicing and good results will come. This is not a testosterone-propelled craft.
Norm

    Bookmark   April 7, 2005 at 10:32AM
Sign Up to comment
More Discussions
Routers
I am thinking of getting a router, never owned one....
hogan_nj
golf t horse racing game templete
could someone email me the template for a horse racing...
ziggymaster
Removing excess dried tung oil, over wax...
Hello, I was refreshing the tung oil finish on my walnut...
pasigal
making templates from graph paper
I seen some of the woodworking plans on the Internet...
hoganjr
Differences in Wood Stains?
I went to purchase some stain to refinish a stripped...
jellytoast
© 2015 Houzz Inc. Houzz® The new way to design your home™