new construction vs replacement windows

chillymillieDecember 11, 2009

I need some help. My windows are only 10 years old and are single-hung. They are drafty so I have decided to replace them. First my house is on a slab and has vinyl siding. So I have been told, I cannot go with replacement windows but rather new construction windows. Also, I have wide blinds and have been told they will not work with replacement windows, that I may have to get rid of them.

Second, I am a woman and feel like I am being taken with the installation and the costs. No one wants to explain the process to me, they just want to install the windows, get paid then leave. This is a big concern to me as I am retired and on a limited income.

Please help me with the glass thickness, low e and argon etc. and how to make the right decision.

Thank you for reporting this comment. Undo

Find another dealer. I have always considered replacement windows as something that is made to fit in any frame. Unless the frame size is the same for both your current and new windows, I don't see how they would fit.

Perhaps the wide blinds won't fit because the new window is wider than the old window (mainly because all new windows these days are double glazed.)

As for LoE, it is a coating that lowers the heat transfer and retards the solar heat gain (i.e., the sun coming in and heating the home - which although good in the winter is very bad in the summer.) The glass manufacturer is probably Cardinal, which makes a number of LoE glasses - 240, 270 & 366. The last two digits are the visual light transmittance in percent (the lower, the more shading.)

The 366 seems to be the best glass for any window that would get the summer sun, as it has the best solar heat gain retarding with a good light transmittance (good for east & west.) The 270 is the cheapest, but has low solar gain retarding (good for the north, or south, if the eaves are long enough.) The 240 is almost like a tinted glass, and nowadays is really only put in by cheap contractors who don't want to pay the extra for the 366.

Argon or Krypton (or any noble gas) lowers the heat transfer even more - but not enough IMHO (at typical dealer prices) to make it worth it. Besides, evidently the gas bleeds out after a few years, being replaced with plain air, which is about 3/4 Nitrogen and 1/4 oxygen (both diatomic molecules which result in a higher heat transfer coefficient than the noble gases.)

    Bookmark   December 11, 2009 at 9:34PM
Sign Up to comment
More Discussions
Decorating a new windowsill?
Hi everyone, We are a small growing business specialising...
LightGlow UK
Best garden window?
I am remodeling our galley kitchen. It's small and...
new construction vs "replacement" windows
I am somewhat confused from reading various company...
Matching window/patio door hardware to interior doors?
..reposted in remodeling... We will have white interior...
Requesting feedback re: interior bronze window frames
My home is a small (1500 sq. ft.) contemporary with...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™