Need maple stemware rack!! Can anyone help?

slc2053September 14, 2007

Hi..

We remodeled our kitchen with maple cabinets and a custom stain. We want a maple stemware rack for attachment to the bottom of a cabinet above our wine/beverage cooler. I can't find a size to purchase and a "friend" who said he'd make us one hasn't gotten around to it and I don't think he ever will! ;-) Does anyone know of someone I can send photos and dimension to that can make me one? We just want a simple one that you typically see (something like in first photo below) to go under our cabinet (second photo below).

We want it unfinished as we have the stain we used on our cabinets and we'll stain it to match.

Thanks in advance!!

Suzanne in Johnstown, PA

Thank you for reporting this comment. Undo
Jon1270

That would be a piece of cake for any small shop. Have you asked any local guys besides the "friend?"

    Bookmark   September 15, 2007 at 5:46AM
Thank you for reporting this comment. Undo
sombreuil_mongrel

Hi,
This is a stock item. Rockler sells it by the foot (or inch). Most all cabinet manufacturers offer it as an option.
Casey

Here is a link that might be useful: assembled stemware holders

    Bookmark   September 15, 2007 at 9:39AM
Thank you for reporting this comment. Undo
oldscout

Send me the measurements and I will make it for you.

    Bookmark   September 16, 2007 at 12:43PM
Thank you for reporting this comment. Undo
slc2053

Thanks oldscout!

May I ask what you'd charge as someone emailed me personally after seeing my post and said "custom" made stemware rack could be quite expensive!

Thanks

    Bookmark   September 18, 2007 at 7:16AM
Thank you for reporting this comment. Undo
slc2053

oldscout..can you email me? I tried to email you but your email address wasn't available on "My Page". My email address is on "My Page." Thanks.

    Bookmark   September 21, 2007 at 7:37AM
Sign Up to comment
More Discussions
How extensive does Cherry wood (Cabinet) darken ???
We plan to stain our cherry cabinet to burgundy/red...
mcook
Can this door be repaired?
We're renovating a 1920 house and this bedroom door...
weedyacres
Brand new dewalt planer, not feeding?
Hopefully it's just me doing something wrong. It's...
fireweed22
Planing weathered/near rotted lumber?
I was just curious if it's OK to run some old, very...
fireweed22
How to tell treated vs. untreated wood?
Can anyone tell me if there's a way to distinguish...
unkyaku
© 2015 Houzz Inc. Houzz® The new way to design your home™