Concealed 270 degree open hinge?

fourambluesSeptember 7, 2012

I've been spending a lot of time on the kitchen forum lately, am a first time visitor here. Tuns out one of my cabinets is very hard to access with its 110 degree door swing. I really need 270. All my hinges are concealed soft close. Is there such a thing as a concealed 270 degree hinge (also called fold-back, I think)? Even better if it's soft close. TIA for any info you can give me!

Thank you for reporting this comment. Undo
sombreuil_mongrel

180* not enough?
Link below, but frameless style.
Casey

Here is a link that might be useful: 270*

    Bookmark   September 8, 2012 at 3:33PM
Thank you for reporting this comment. Undo
fouramblues

Thanks for the link, Casey. I failed to mention that I've got face frame cabs. But if it exists for frameless, I can probably find it for framed.

180 would be fine for access, but I do worry about the door getting ripped off the hinges. I'd consider 180; do you have any recommendations?

Thank you!

    Bookmark   September 9, 2012 at 10:18AM
Thank you for reporting this comment. Undo
sombreuil_mongrel

I don't think it will work for faceframes, because to fold back it must also clear the faceframe's width, and the mechanics of the hinge thereby gets more complicated than just having to clear the 3/4" box side. Plus the manuf. does not know how wide _your_ FF's are...
Casey

    Bookmark   September 10, 2012 at 7:41AM
Thank you for reporting this comment. Undo
fouramblues

OK, thanks for the advice, Casey. 180 it is!

    Bookmark   September 11, 2012 at 12:39PM
Sign Up to comment
More Discussions
Refinishing bedroom furniture
Hi everyone! Need advise please. We refinished a computer...
glittergirl_tx
Gel stain on stair treads and handrail?
I have read many of the inspirational posts in the...
amt782
making templates from graph paper
I seen some of the woodworking plans on the Internet...
hoganjr
Wood surface with bad smell
I purchased used entertainment shelf from Kijiji and...
markintosh
Removing excess dried tung oil, over wax...
Hello, I was refreshing the tung oil finish on my walnut...
pasigal
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™