Wall oven electric wiring

fezzApril 9, 2013

My problem is that my stove doesn't work. Selector light lights but temp light not working (light good)
I was moving the breakers because one of the breakers was not very firm or tight in the box but I might not have replaced them in the right location.
Electric stove hard wired to breaker.
My Breaker box has 3 breakers. Input to box is White to ground block, Red, & Black plus ground wire to panel box. 2 breakers are 25 amps. 1 breaker is 15 Amp. Currently both 25 amp breakers are on black side, 15 amp on red side. I get 120v from each breaker terminal with terminal to ground, 0v from the 2 - 25 amp breaker terminal to terminal.
Wires from stove are White, Black, Red, and blue. My questions are (1) What location should the breakers be in the box, and (2) Which wires should go to each breaker?

Thank you for reporting this comment. Undo
Ron Natalie

Did things work before you started messing with the panel?

    Bookmark   April 9, 2013 at 8:36PM
Sign Up to comment
More Discussions
Goodbye Phone Jack: what to do with wires?
We want to remove this phone jack. It's in a useless...
Electrical Problem.
My mom's house has a problem with the lights temporarily...
Debra Johnson
Garage florescent light flickering - bulb or fixture problem?
I replaced the GE F40 RES garage lights with a GE F40...
bibbus 7b
Power to shed
Looking to run one 20 amp circuit to my shed and I'm...
Dryer power cord next to vent
My contractor is enlarging the dryer vent hole in the...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™