Fluorescent fixture and extention cord

dowlinggramMarch 6, 2012

I have a fluorescent fixture for growing plants. It takes 2 T8 32 watt bulbs. I would like to add a second fixture. Unfortunately where the fixtures must be located is not near an outlet so here's what I propose to do.

Plug both fixtures into an old computer power bar. Plug the power bar into a 25 foot outside 3 pronged extention cord. Plug the extention cord into the timer in the outlet. It this feasible or dangerous. I am hoping to come up with a better solution but for this year would this work. (If it's iffy I'd rather not take a chance

Thank you for reporting this comment. Undo
bus_driver

Why the duplicate posts?

    Bookmark   March 6, 2012 at 5:39PM
Thank you for reporting this comment. Undo
dowlinggram

Sorry about that. I posted once and it didn't show up when I went back to see so I posted again only to have both show

    Bookmark   March 6, 2012 at 6:27PM
Sign Up to comment
More Discussions
ARGH! no boxes
Went over to my daughter's house to help them change...
Ron Natalie
Replacing fan speed dial back to standard toggle?
I am removing a ceiling fan and replacing it with a...
onkyokoi
Need help Replacing old dimmer that used only 2 wires in a three way
I need advice as to which wire to connect to which...
txmat
Doorbell goes off by itself.
Can anyone tell me why this would happen? It's a wired...
stu2900
Spa Capacitor question
My spa is wired for 220v. The pump motor is rated for...
pugmark
© 2015 Houzz Inc. Houzz® The new way to design your home™