Disassembling joints that have been glued?

prairiemoon2 z6 MAApril 11, 2014

We have a wooden frame that has been screwed together on the corners and glued. I'm wondering if that is going to be a problem to disassemble? Is there a tool or technique someone could suggest? Thanks.

Thank you for reporting this comment. Undo
klem1

A miter saw?

    Bookmark   April 12, 2014 at 12:05AM
Thank you for reporting this comment. Undo
cold_weather_is_evil

With the info you posted this could be anything. Other than removing the screws and smacking the glue joint with a smacker, I can't see any way to answer...

    Bookmark   April 12, 2014 at 12:16AM
Thank you for reporting this comment. Undo
prairiemoon2 z6 MA

Well, we are working on a vegetable bed outdoors and it is heavy and we didn't get it in it's final position before we finished it and it was suggested we just disassemble, move it, and reassemble but the corners are glued. We don't want to damage it. So it seems we could remove the screws and use a miter saw on the glue between the pieces? Smacking it with a hammer, I suppose we might get away with it without damaging if we were careful and maybe used something between the hammer and the wood to cushion it? The wood is Eastern Hemlock, 2" thick.

    Bookmark   April 12, 2014 at 5:26AM
Thank you for reporting this comment. Undo
prairiemoon2 z6 MA

Thanks anyway, but we managed without having to disassemble so no need to cut through the glue.

    Bookmark   April 12, 2014 at 4:12PM
Sign Up to comment
More Discussions
Fence construction & what to use for finish
My fence is coming along nicely! Started last fall...
kashka_kat
Pear tree wood
Is their any value in Pear tree wood? My mother has...
Pooh Bear
Kitchen Island panel made from veneer??
So we just had custom cabinets made for our kitchen...
kluken
Right size tip-out tray for kitchen sink cabinet
My kitchen sink cabinet is 24" wide. I want to...
africanboy
Advice on finishing outdoor cypress mantel
Hello all, I have a wood finishing dilemma. I have...
Jack Mason
Sponsored Products
Refurbished No Fear Pinball Machine
FRONTGATE
Honey-Can-Do Caddies 15 in. W x 16 in. H x 14 in. D Commercial Chrome Table
$35.60 | Home Depot
Chard Table Clamp Manual Meat Grinder - HG-8
$30.99 | Hayneedle
Lithonia Lighting Ceiling Mounted Lighting 4 ft. Fluorescent General Purpose
$79.99 | Home Depot
Refurbished Star Wars Pinball Machine
FRONTGATE
Kobe RA2830SQB-WM-1 30W in. RA028 Series Wall Mounted Range Hood Multicolor - RA
$818.00 | Hayneedle
Fire Pit Art Wings of Flight - Artisan Log Rack - WOF
$390.00 | Hayneedle
Gray Cubby Shoe Bench
$49.99 | zulily
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™