New house - baseboard trim question

TFCwifeyMarch 4, 2013

Hi we are in the process of building a new house. I don't know much about trim/wood working etc. On our 2nd floor we had wood floors put in. Now the trim guys came and put this down (see pic) Is this normal? I always thought the trim went all the way to the floor? Why would they leave that space between the floor and trim. I feel like dirt and things will get caught under there. If they can't change it so it all goes to the floor I at least would like them to paint it white.
Any help understanding why they would put it in this way would be greatly appreciated. Thanks

Thank you for reporting this comment. Undo
TFCwifey

oops sorry picture uploaded from my phone sideways.

    Bookmark   March 4, 2013 at 1:25PM
Thank you for reporting this comment. Undo
snookums2

You can click the picture to see it right side up.

I can't see the gap. I am having the same problem though. There's about 1/8" gap between the shoe and the floor. I don't understand why it was necessary to install it that way. Glad to know I am not the only one who thinks about dirt collecting, as well as being a bug entrance!

It really gets tiring with this stuff. I'm going to have to pay someone again to do it over. It really bothers me. It looks odd too, I think, like a professional didn't install it. Shoe does not sit above the floor. I'll be caulking behind it along the baseboard while I'm at it.

This post was edited by snookums2 on Mon, Mar 4, 13 at 21:04

    Bookmark   March 4, 2013 at 8:53PM
Thank you for reporting this comment. Undo
TFCwifey

I spoke to my builder and he says that this is the old school way of doing it and that it is done more so in New England (we are in CT). He says its more expensive to do it this way as well. I hate the way it looks.
He said they do it because the wood floor expands an contracts that u would see the gap more so if they did it the other way.
I don't know if I agree with his philosophy .

    Bookmark   March 4, 2013 at 10:07PM
Thank you for reporting this comment. Undo
snookums2

I was wondering if it might be related to expansion. I noticed it in winter but not earlier (I was also sitting on the floor recently, however!). My floor is engineered wood (less expansion issues) and I don't know that flooring gains height with humidity. I have only heard of leaving expansion gaps along the edges when the floor is installed because it needs room to move side to side.

So your builder is allowing for height expansion of your floor during the summer months? Is that what he was saying? How would you see the gap more if they did not raise the shoe off the floor? I have been lied to so many times before as if I were an ignorant homeowner/woman that wouldn't know any better (had already researched things) that I don't really believe much anymore until I've checked it out for myself.

I'm looking at other people's flooring and the shoe is sitting flush during winter, not floating above it, lol.

I do not like it either. I have been trying to seal my house better and don't like crud collectors. Drafts is another good point.

    Bookmark   March 4, 2013 at 10:55PM
Thank you for reporting this comment. Undo
snookums2

diyadvice . com

    Bookmark   March 5, 2013 at 12:18AM
Thank you for reporting this comment. Undo
glennsfc

Well I've never heard of doing it that way with solid nailed down flooring. I don't see the gap...where?

We do provide for a small gap when shoe molding will meet floating wood flooring.

    Bookmark   March 5, 2013 at 12:27AM
Thank you for reporting this comment. Undo
rwiegand

I've always thought (and seen in old houses) that the baseboard is attached to the wall, but the show moulding is nailed to the floor. Assuming that you finish the base before applying the shoe any movement should be pretty much invisible.

    Bookmark   March 5, 2013 at 8:19AM
Sign Up to comment
More Discussions
Wood surface with bad smell
I purchased used entertainment shelf from Kijiji and...
markintosh
What is this wood? (Want to match)
When we bought our house we had the first floor floors...
cardinegreen
species of window sill/molding?
I think this is my favorite window pic. Any idea what...
aptosca
Wood working plans
I'm sure most here heard of Teds woodworking plans....
hogan_nj
Brand new dewalt planer, not feeding?
Hopefully it's just me doing something wrong. It's...
fireweed22
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™