Spacing of Gas Lines from Electrical Panels

plumeriavine_2010February 18, 2010

Back in January, one inspector noted that there was a new gas line encroaching on a sub panel.

Does anyone know what distances between the gas line and the sub panel should be?

The plumbers will have to do the correction.

I'll try to post a pic later.

Thank you for reporting this comment. Undo
bus_driver

Those specifications are part of the fuel gas codes, not the electrical codes. Gas codes may vary depending on the jurisdiction. In my area, the required distance from an electrical panel to a gas fitting (not a gas line) is 4 feet.

    Bookmark   February 18, 2010 at 12:21PM
Sign Up to comment
More Discussions
How to get garage freezer to work in cold weather
I have a 7-year-old GE refrigerator/freezer in my unheated,...
amyf5
Too much load for circuit?
I have 200 amp service to the main panel (which has...
zver11
Need help Replacing old dimmer that used only 2 wires in a three way
I need advice as to which wire to connect to which...
txmat
Spa Capacitor question
My spa is wired for 220v. The pump motor is rated for...
pugmark
Doorbell goes off by itself.
Can anyone tell me why this would happen? It's a wired...
stu2900
© 2015 Houzz Inc. Houzz® The new way to design your home™