electrical wiring

renard15February 12, 2014

I have a junction with four wires into it there is electricity to the box but none after that?

Thank you for reporting this comment. Undo
greg_2010

You might want to spend a little more time describing the situation in order to get any good responses.

    Bookmark   February 12, 2014 at 1:39PM
Thank you for reporting this comment. Undo
renard15

So after the junction box the four areas in which the wires go to do not work. no electricity in the outlets or the switches to run light. I have changed the circuit breaker: after that the junction box which has electricity going into it.

    Bookmark   February 12, 2014 at 5:55PM
Thank you for reporting this comment. Undo
randy427

How do you know that you have power into the junction box? What kind of tester did you use?

    Bookmark   February 12, 2014 at 7:02PM
Thank you for reporting this comment. Undo
kudzu9

renard-
With all due respect, you need to get help from a knowledgeable friend, or, better yet, a licensed electrician. It's impossible to tell what is really going on or what might be defective from the info you've provided. My concern is that there could be an existing electrical hazard now or after you are done that could electrocute someone or burn your place down. I'm not trying to be an unhelpful jerk, but I don't think your level of knowledge is up to doing this correctly, and we want you to be safe.

We all started from the basics, but most of us got those basics with the help of a friend or from a training course. In my opinion electricity is too dangerous to try to solve a problem like this in this forum. There are too many unknowns.

This post was edited by kudzu9 on Wed, Feb 12, 14 at 20:59

    Bookmark   February 12, 2014 at 8:56PM
Thank you for reporting this comment. Undo
petey_racer

I totally agree with kudzu9.
You've already started throwing parts at this problem for no reason (changing the breaker when there is still power), and you can't even explain the problem clearly.

PLEASE, just bite the bullet and hire a real electrician to fix this. The peace of mind will be worth every penny.

    Bookmark   February 13, 2014 at 7:57AM
Sign Up to comment
More Discussions
Insulation in electrical box
While in my attic the other day I saw an open electrical...
sgilliatt
Light boxes on/in 6X8 timber floor joists for log home
Just trying to figure how to wire a couple light fixtures/chandelier...
yota_85
Replacing fan speed dial back to standard toggle?
I am removing a ceiling fan and replacing it with a...
onkyokoi
Need help Replacing old dimmer that used only 2 wires in a three way
I need advice as to which wire to connect to which...
txmat
Multiple Fluorescent Ballasts in one light fixture
Hello GardenWeb. I'm not new here, but couldn't log...
MikeM21
© 2015 Houzz Inc. Houzz® The new way to design your home™