Fixed one undercabinet lighting fixture and next one not working

marynorthmitchellJanuary 1, 2012

I replaced one of my undercabinet lighting fixtures because a new bulb didn't make it work. The new fixture works fine, but now the one to which it is connected no longer works (a new bulb doesn't help). Is this a coincidence and I should just replace the second fixture or is there something else going on? Thanks for your help!

Thank you for reporting this comment. Undo

Check for loose connection at one of the connections you made.

    Bookmark   January 2, 2012 at 10:19AM
Thank you for reporting this comment. Undo

Thanks for the advice--I'll give it a try!

    Bookmark   January 2, 2012 at 2:18PM
Sign Up to comment
More Discussions
Same circuit for AC air handler and whole-house fan?
Hi, I've got a furnace/air handler in my attic. I was...
Dryer power cord next to vent
My contractor is enlarging the dryer vent hole in the...
Can you make a splice inside one of these?
The reason I ask is my neighbor's house was destroyed...
Garage florescent light flickering - bulb or fixture problem?
I replaced the GE F40 RES garage lights with a GE F40...
bibbus 7b
Installing 220/240V. 50/60Hz appliances from Europe
I hope to install a "Domino" modular system...
Sponsored Products
Minka Lavery Abbott Place Transitional Bath Vanity Light
Holtkoetter | Viennese Floor Lamp No. 6542/1*P1
$398.00 | YLighting
George Kovacs Energy Efficient 39 1/2" Wide Bath Light
Euro Style Lighting
Orbitier 19-Light Polished Chrome Pendant with Clear Glass -Halogen
35w 120V Frosted MRC16 GU10 Halogen FL 38 Deg
$40.80 | PLFixtures
Eros Pink Circle Rings Double Gourd Table Lamp
Lamps Plus
Dolante Wall Sconce by Eurofase
$70.00 | Lumens
Lab Bottle Pendant Cylinder
© 2015 Houzz Inc. Houzz® The new way to design your home™