Craftsman GDO - led blinks 5 times

andy_in_mnDecember 2, 2008

Hi,

I hope Don or another seasoned tech can help. I have a Craftsman 1/2 HP GDO model 139.53662SRT that was purchased and installed in 1997. Three days ago it stopped in the up position. When I push any remote (car, keypad, or even wired pushpad), the unit clicks and then the LED (not the light bulb) flashes 5 times. I tried unplugging the unit for two minutes. I also made sure the Safety Reversing Sensors were aligned. Is the unit getting to the end of it's useful life, or is it worth repairing?

Thank you for reporting this comment. Undo
don_1_2006

Most probably the trolley is jammed against the bolt just in front of the motor unit. Remove the bolt and then the door will close. While it is closed find the 'up limit' on the side of the motor unit and using a small screwdriver turn this 3 or 4 turns in the opposite direction of the arrow printed on the cover. Be sure to replace the bolt and you should be set.

    Bookmark   December 3, 2008 at 10:53AM
Sign Up to comment
More Discussions
Big shelving project part 2
This is a follow up to this thread: http://ths.gardenweb.com/discussions/2604905/big-shelving-project This...
springcorn
damp/ruined dry wall in window corners
I need help with a plan or how to for fixing and repairing...
betty_joanne
Painting exterior of house with cedar siding---what to expect
I am about to start getting estimates on having the...
sierrashopper
Crawlspace floods with water, but it doesnt touch the wood, ok?
I have a crawlspace that is about 2 ft from the ground....
tlbean2004
Siding advice for chimney
Hello and thanks in advance for any advice. Yesterday...
andreadeg
© 2015 Houzz Inc. Houzz® The new way to design your home™