1/2 hp Craftsman garage door opener

wnkwsDecember 26, 2008

The remote and the keyless entry has quit working. The wall mount still works. I have replaced the batteries in both but it still does not work. I have tried to program both again but this does not work, the learn indicator light comes on when the learn button is pressed but the motor unit light does not turn on or blink(the light does work)when programming the keyless and remote. HELP...Any suggestions?

Thank you for reporting this comment. Undo
don_1_2006

The logic board has a receiver that gets the signal from the remotes and the wireless keypad. The wall control is hard wired like a doorbell. I think your receiver has quit.

    Bookmark   December 26, 2008 at 4:17PM
Sign Up to comment
More Discussions
Ice damming !! Desperate for advice 911!!!
WE have severe ice damming on the roof of our home...
coffeemama1
damp/ruined dry wall in window corners
I need help with a plan or how to for fixing and repairing...
betty_joanne
Should we raise/fix concrete slab in driveway or wait?
Just moving into a new house this month. So the inspector...
mattsk42
Water Drip Stain on Roof Fascia?
My roof edge on the corners of the front porch is leaving...
pbx2
Stranges lines in frost pattern on roof
I have these lines on the roof when there is a frost....
cswartzwelder
© 2015 Houzz Inc. Houzz® The new way to design your home™