Thread twisting. How to stop???

patsyannJune 30, 2007

I have a cone thread on an overhead rod which is supposed to feed the thread onto the sewing machine without it twisting. Unfortunately it twists so badly it regularly comes out of the upper tension assembly. Any suggestions would be appreciated.

Thank you for reporting this comment. Undo
kathi_mdgd

I'm not sure what kind of overhead apparatus you have,but when i use the cone thread i have one of those stands made for that purpose,and it stands behind the machine.If you don't have one of those you can try something like a mason jar or mayonnaise jar(not plastic),and set your cone down inside of that.HTH
Kathi

    Bookmark   June 30, 2007 at 1:31PM
Thank you for reporting this comment. Undo
sewbusy_rn

The thread for sergers(on cones) is twisted the opposite way of regular sewing thread so that sounds like the problem. The tension disc is putting pressure on the thread and it is splitting. Hope this helps. Sewbusy_rn

    Bookmark   August 18, 2007 at 10:16PM
Sign Up to comment
More Discussions
Need drapery fabric problem advice
I had polyester draperies made and the workroom pressed...
sierrashopper
Newbie Needle Question
How do you know it is time for a new needle? And, the...
Merrygardener
a place to order
My family room has windows all around . It is nice...
barb_roselover_in
The little Singer 15- made her way home today!
I went back to the Thrift Store and asked the clerk...
caroline94535
Great show...fit2stitch
I just started watching fit 2 stitch with Peggy Sagers...
Annie Deighnaugh
© 2015 Houzz Inc. Houzz® The new way to design your home™