Husqvarna 350 chaincaw

AmedeoOctober 25, 2013

My Husquvarna 350 chain saw loses power and will not run when cutting. I replaced with new, spark plug, fuel and filter. saw starts on one pull.

Thank you for reporting this comment. Undo
HandyMac

Great

    Bookmark   October 30, 2013 at 12:55PM
Thank you for reporting this comment. Undo
ionized_gw

Fuel flow might be reduced. Check the fuel line and carb for fouling. Have you cleaned the air filter recently?

    Bookmark   October 30, 2013 at 4:31PM
Thank you for reporting this comment. Undo
ionized_gw

Fuel flow might be reduced. Check the fuel line and carb for fouling. Have you cleaned the air filter recently?

    Bookmark   October 30, 2013 at 4:33PM
Sign Up to comment
More Discussions
how did gap between floor and wall close up by itself?
I have hardwood floors and there is/was a spot at the...
tlbean2004
T1-11 siding: Replacing rusted z-flashing?
I have several questions about z-flashing for T1-11...
rogerv_gw
Need help with shower tiles! Ceramic?
Please help me identify the preexisting tile in my...
shufflehop
Need advice for gap under door frame
Hi, We had a contractor install pre-hung interior doors,...
pam27d2001
Gable Vent Color Suggestions- Insight please
Hopefully someone can give me insight! We recently...
storyta
© 2015 Houzz Inc. Houzz® The new way to design your home™