Craftsman garage door opener questions

fairlaniacOctober 24, 2008

I have a Craftsman opener installed model 139.53975SRT and the sprocket shaft busted. I have an older unit I want to put in place of the broken unit, it's model number is 139.53615SR. Since the wiring terminals are labelled differently cand someone direct me on how to wire the older unit with the wiring that is installed? I have the three button wall unit and the sensor wires to hook up. Is this possible? See pics here (you may need to cut/paste)

Thank you for reporting this comment. Undo

The older opener is wired correctly except the red wire and the white wire connected to terminal 1 should be reversed. Check the wall control. It is printed on the small circuit board where the red and white wires go.

    Bookmark   October 24, 2008 at 6:44PM
Sign Up to comment
More Discussions
Old kitchen drywall
Finally are giving our kitchen a facelift. We have...
Ice damming !! Desperate for advice 911!!!
WE have severe ice damming on the roof of our home...
damp/ruined dry wall in window corners
I need help with a plan or how to for fixing and repairing...
Drywall issues?
I have noticed a spot above a window that has been...
Should we raise/fix concrete slab in driveway or wait?
Just moving into a new house this month. So the inspector...
© 2015 Houzz Inc. Houzz® The new way to design your home™