craftsman garage door opener adjustments

everguardAugust 6, 2009

I just purchased a home that has a craftsman door opener, model 139.186006. The previous owner had disconnected it for security reasons. I have reconnected it but it will not operate properly. When I use the remote and click to open the drive moves about 12 inches up and then automatically moves back down. I have adjusted settings on the side and back of the unit and nothing seems to make a difference. I repeatedly clicked the remote and after each cycle the unit would move about 1 inch towards the power box. After about 25 cycles it stopped at the bolt next to the power box but will not move back down. Anyone know what is wrong? Thanks, Ron

Thank you for reporting this comment. Undo
don_1_2006

If the model number you give is anywhere close to being right that opener is older than you are. The last owner knew what he was doing when he disconnected it. Do yourself a favor and purchase a new one.

    Bookmark   August 6, 2009 at 7:13PM
Sign Up to comment
More Discussions
Water Drip Stain on Roof Fascia?
My roof edge on the corners of the front porch is leaving...
pbx2
Need a professional locksmith service!
Hey guys, I am new to this forum and the reason I registered...
martin-ferdinand
Big shelving project part 2
This is a follow up to this thread: http://ths.gardenweb.com/discussions/2604905/big-shelving-project This...
springcorn
Drywall issues?
I have noticed a spot above a window that has been...
deandiamond
damp/ruined dry wall in window corners
I need help with a plan or how to for fixing and repairing...
betty_joanne
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™