Singer Touch & Sew 603: How do I reattach the slide plate?

bayareafrancyFebruary 17, 2009

Hi all,

My son managed to loosen/remove the slide plate from the machine (I think he was sliding it back and forth too fast--one side came loose, and then the other side).

How do I reattach it? I can lift the clip to get one side hooked on, but I can't lift the clip enough to get the other side on. Do I actually need to unscrew the clip from the machine, then put the plate on the clip, then screw the clip back on?

Thank you!

:-)

francy

Thank you for reporting this comment. Undo
lamalu

I use the tiny screwdriver that came with my machine. Slide one side onto the clip and then use the screwdriver to pry up the other side of the clip and slide the other side of the plate on. I usually have to fiddle with it a little to get it on.
Hope this helps!

    Bookmark   February 18, 2009 at 9:17AM
Thank you for reporting this comment. Undo
bayareafrancy

Thank you! That is exactly what I finally managed to do, but I was nervous about how far I had to lift one side in order to get it on (thought I'd break it). I couldn't figure out how to get the actual clip off, though it appears to be removable.

:-)

francy

    Bookmark   February 18, 2009 at 12:53PM
Sign Up to comment
More Discussions
sewing machine about to die?
I have to admit I have had quite a few problems all...
jjjjade H
altering pants
When I take in the legs of pants, I take in both seams...
laurenjay
Can you tell me if this will work?
Since I have been socked in for four days now, have...
barb_roselover_in
Great show...fit2stitch
I just started watching fit 2 stitch with Peggy Sagers...
Annie Deighnaugh
sewing curtain that has print on one side
I wanted to make curtain that have the print side on...
tropical_thought
© 2015 Houzz Inc. Houzz® The new way to design your home™