Repairing a hole in a concrete wall

Eric212NYCJuly 9, 2011

Hello,

Recently I had a new garage door installed. During the installation they had to chip a piece of concrete to fit the 2 x 4 wood framing. As a result I now have a 2 to 3 inch wide hole that is about 8 inches in height. The depth of the hole is about 3 inches. What is the best way to fill this hole?

From inside the garage I can see light coming in so the hole goes straight through. Went to Home Depot and they suggested using quikcrete to patch the hole followed by sand quikcrete mix to finish the outer portion.

Would post a picture but I don't see any link to upload.

Any suggestions would be appreciated.

Eric

Thank you for reporting this comment. Undo
sierraeast

Here's an interesting article:

Here is a link that might be useful: hole repair-expanding

    Bookmark   July 10, 2011 at 11:31AM
Sign Up to comment
More Discussions
Jacking house up
Ok the first time I posted in wrong place. I'm going...
music9704
damp/ruined dry wall in window corners
I need help with a plan or how to for fixing and repairing...
betty_joanne
2x8 Joists are 1.75x7.75 and 2x6 Joists are 1.75x5.75? why is this?
I know that lumber is smaller than actually stated...
tlbean2004
Siding advice for chimney
Hello and thanks in advance for any advice. Yesterday...
andreadeg
Curtain Rods
Hi, I am not sure where to post this so my apologies...
newquilter
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™