Need to build parts for drawers

JBL121July 18, 2014

I have a 73 Dickman MH and has plastic drawers in the kitchen. Their are grooves built in the sides of the drawers and nylon hooks that the drawer slide on when installed. I have a photo of the hooks. I have a couple that have broke and they are not made anymore.

I can make some if I had some 3/8" nylon dowel rod. Unfortunitly I cant find anyplace to purchase it.

Any suggestions?

Thanks for any response

Joe

Thank you for reporting this comment. Undo
sdello

The attached link is for a chimney brush extension made of 3/8 nylon rod. It might work. Also search the Grainger site for "nylon dowels" they have dowel pins that might do the trick.

Hope that helps.

Here is a link that might be useful: 3/8 in. nylon rod

    Bookmark   July 18, 2014 at 1:22PM
Thank you for reporting this comment. Undo
kudzu9

Amazon, too...

Here is a link that might be useful: 3/8

    Bookmark   July 18, 2014 at 2:01PM
Thank you for reporting this comment. Undo
rwiegand

McMaster Carr carries it in a variety of different nylon materials.

Here is a link that might be useful: nylon rods

    Bookmark   July 18, 2014 at 2:21PM
Sign Up to comment
More Discussions
Settling crack been repaired by 6 people - any advice?
Our house is 25 years old. The foundation was put in...
BelfastBound
Would patio foundation cracks affect the house foundation?
Hi i have a question and i hope that you can answer...
john2525
Roof leaking due to antique bricks? (X-post with Bldg a Home)
Good morning! We are having a problem with our new...
cvazqu
damp/ruined dry wall in window corners
I need help with a plan or how to for fixing and repairing...
betty_joanne
Siding advice for chimney
Hello and thanks in advance for any advice. Yesterday...
andreadeg
© 2015 Houzz Inc. Houzz® The new way to design your home™