Air Roofing nailer

SBLandscapeMay 2, 2011

I'm looking at getting a roofing nailer. I've narrowed them down to Ridgid, Senco, Bostitch & Dewalt, I'm going through their CPO site.

Ridgid is $160, comes with a lifetime service guarantee I believe.

Senco Roofpro 450 is $140.

Bostitch URN46 is $150

Dewalt D51321R is $140

Looking for a good nailer but don't want to spend big bucks on it.

Thanks.

Thank you for reporting this comment. Undo
shadetree_bob

I got mine at Harbor Freight. Been using it over a year and no problems. Just make sure you keep it oiled, basically the same thing you have to do with any of them.

    Bookmark   May 2, 2011 at 11:07PM
Thank you for reporting this comment. Undo
HandyMac

Of those listed, I'd get the Senco. I have several tools made by the other brands, but Senco nailers have been the second best for years, with Hitachi leading.

    Bookmark   May 3, 2011 at 11:12AM
Thank you for reporting this comment. Undo
randy427

I had a Bostitch (I don't recall the model number) for several years of trouble-free use, though it needed the air pressure to stay over 100 psi to perform smoothly.

    Bookmark   May 3, 2011 at 3:18PM
Thank you for reporting this comment. Undo
energy_rater_la

senco worked well for me..untill I gave up roof work
because of my painful knees.
be careful up there.

best of luck!

    Bookmark   May 3, 2011 at 7:47PM
Thank you for reporting this comment. Undo
sware56920_yahoo_com

Stay away from the Harbor Freight nailers. The first one was DOA, the second is not much better. It takes four pulls of the trigger to fire one nail, and that nail is bent most of the time. I've heard many good things about the Senco and borrowed one to see for myself. What a difference. That's what I'm going with.

    Bookmark   May 9, 2011 at 9:59PM
Thank you for reporting this comment. Undo
JamesAllen

Based on my experience, I'd go for Senco.

Here is a link that might be useful: Calgary roofing

    Bookmark   May 11, 2011 at 5:22AM
Thank you for reporting this comment. Undo
SBLandscape

I was going to get senco but my birthday was coming up, so I had to wait. My mom ended up getting me the Ridgid.
Should I return it & get the senco or just go with the Ridgid?
Thanks for all the replies.

    Bookmark   May 17, 2011 at 6:25PM
Sign Up to comment
More Discussions
How to safely pull down attic stairs in 12' ceiling
Hello all, I am buying a house with 12' ceilings and...
ricewalker
Need advice for gap under door frame
Hi, We had a contractor install pre-hung interior doors,...
pam27d2001
Garage door
Something strange happened last night. We were watching...
hoganjr
Cellulose Insulation - Do we really need the blower?
We have 8 to 10 packages of cellulose insulation that...
kendog2
Pouring a new driveway
Hello everyone, first time poster. I'm ready to sign...
cin_ram1972
Sponsored Products
Beautyrest Recharge 'Maddyn' Luxury Firm King-size Mattress Set
Overstock.com
Downtown Edison Screened Drum Pendant by Minka-Lavery
$379.90 | Lumens
Campania International Celtic Cross Cast Stone Garden Statue - S-474-AL
$144.99 | Hayneedle
Upholstered Astrid King Platform Bed - Blue
Zuri Furniture
6" French Bronze Dragonfly Tube Birdfeeder
Fifthroom.com
52" Minka Aire Aluma Flat White Ceiling Fan
Lamps Plus
Antique Cream Versailles Frame
$14.99 | zulily
Brisa 2000 Ceiling Fan
Lightology
© 2015 Houzz Inc. Houzz® The new way to design your home™