Home link and Sears garage door openers

kdrskiApril 6, 2010

I have a new car with Home Link which can be programed to open my garage doors. I have an old model sears opener for which I purchased a new receiver and remote. I do not beleive that it has a rolling code. I cannot get it to program to my Home Link.

I also have a newer model Sears opener with rolling code and cannot get the Home link to accept the signal from the rempote. HELP!

Thank you for reporting this comment. Undo
don_1_2006

Here are the instructions for Home Link.

1.Clear out anything previously programmed into the in-car system from the factory by holding down on the 2-outside buttons simultaneously, until the in-car LED starts flashing rapidly. This may take up to a minute (in most cases, the key should be on auxilary, and/or the car door must be shut).
2.Decide which button you want to make to be your in-car garage door transmitter. Hold your transmitter up near the selected button, pressing both the garage door remote and the selected in-car transmitter button simultaneously. Hold down on the buttons until the in-car, LED light flashes rapidly. This sets the in-car remote transmitter to be your garage door openers make transmitter, but you are not done. You now need to make this in-car transmitter your personal transmitter.

  1. Go to the Learn Button on your garage door opener. The button is usually next to the area where the floppy antenna is connected to the motor head. With Genie it is most often behind the light lens, and an indicator light flashes red when pressed. With Sears or Liftmaster (Chamberlain) it is near, or part of, the terminal screw board, and is a red, green or purple square button with a green, amber or purple indicator light. Press this learn button momentarily. The indicator light will turn on and blink if Genie or otherwise stay lit. For Genie systems, go back to the in-car transmitter button you programmed and press this button 3 or 4 times, or until the door starts moving. This should set your in-car transmitter to your garage door opener. For Liftmaster, Sears, or Linear Megacode press and hold the in-car button you programmed until the garage opener light flashes. Your in-car is now programmed to operate your door.
    Bookmark   April 6, 2010 at 2:51PM
Thank you for reporting this comment. Undo
shortlid

Anyone programed in one of the interior light switches controled by the Homelink feature? Got the reciver from Sears, and my '04 Highlander has teh button with teh house on it free to program.

    Bookmark   April 12, 2010 at 2:01PM
Sign Up to comment
More Discussions
Moss removal help!
Can anyone tell me how to effectively remove what looks...
nycbride07
Andersen patio door repair
My 20-year old Anderson patio sliding glass door is...
daninthedirt
Sidewalk crack
Any way to fill/hide this crack? I could cut slot wider....
stoveguyy
Help - how do I fix this tippy fence - did a dumb thing
Am building a 6 foot wood privacy fence (L shape) from...
kashka_kat
How to fix 1" gaps in drywall seams?
We recently bought our home (build in 1938). One of...
Bongo
Sponsored Products
Harbor 6 Piece Outdoor Patio Sectional Set in Espresso Orange
$1,649.00 | LexMod
EdgeStar Full-size Kegerator and Beer Dispenser
Overstock.com
Tom Dixon | Form Tray Square
$220.00 | YLighting
Fortuny Lamp
Design Within Reach
Pine Forest Door Mat and Runner
Grandin Road
Besa Mistral 22 3/4" High Opal Matte Sconce
Euro Style Lighting
Carlton Off-White Linen Bisque Glaze Shaker Kitchen Cabinet Sample
CliqStudios Cabinets
Perfect Portion Pasta Server
$14.99 | Dot & Bo
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™