Craftsman Garage Door opener remote problem

chiplomMarch 30, 2010

I have a Craftsman garage door opener 1/3hp chain drive part number 41A5021-3E

The garage door doesn't work with the remotes. I replaced the battery in one thinking that was the issue, then the next day it didn't work again, so I unplugged the battery and plugged it right back in to the remote, and it opened the garage door. The following day it did it again, so I started using the other remote, and that worked once. Now the last 3 days neither one has worked.

Thank you for reporting this comment. Undo
don_1_2006

The fact you are having the same problem with both your remotes points directly to the receiver which is a part of the logic board. The part number you gave is the part number for the logic board. If you live in a large community I would call around to door opener service companies and see if they just happen to have a used one. They usually keep some of the parts when they swap out openers.

    Bookmark   March 31, 2010 at 9:34AM
Sign Up to comment
More Discussions
Water Drip Stain on Roof Fascia?
My roof edge on the corners of the front porch is leaving...
pbx2
adjusting stop on lazy susan
Hi all, I have recently moved into an older home with...
blakekr
Crawlspace floods with water, but it doesnt touch the wood, ok?
I have a crawlspace that is about 2 ft from the ground....
tlbean2004
Big shelving project part 2
This is a follow up to this thread: http://ths.gardenweb.com/discussions/2604905/big-shelving-project This...
springcorn
Help with rough, ugly laminate counter edges
Hello, we recently put in new laminate countertops...
Elizabeth Loparco
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™