Sears Craftsman 1/2 HP Garage Door Opener

jrob10January 15, 2010

I recently purchased a home and do not know the code to the keyless entry pad for the garage door. The previous owner didn't know it either as he never used it. I do not have a manual so I was wondering if anyone could tell me how to program a new code without having a current code.

My model # is 139.53636SRT. It was manufactured in 1995. Thanks!

Thank you for reporting this comment. Undo
don_1_2006

First thing I would do is open it up and make sure the battery is still okay.

On the rear of the motor unit near where all those white wires go you will find the smart/learn button. Press and immediately release this and then walk over to your keypad and key in any 4 digit code you like and press enter.

    Bookmark   January 15, 2010 at 4:21PM
Thank you for reporting this comment. Undo
jahaud_aldridge_yahoo_com

yesterday i woke up and and was leaving for work and my garage door wouldnt open ...it is as if the hole unit has no power ...i checked the outlets and their fine ...any suggestions????

    Bookmark   May 29, 2011 at 5:55PM
Thank you for reporting this comment. Undo
don_1_2006

You need to remove the logic board and check for burnt or missing traces especially around the small transformer. Electrical storms and power surges love logic boards.

    Bookmark   May 30, 2011 at 11:03AM
Sign Up to comment
More Discussions
Old kitchen drywall
Finally are giving our kitchen a facelift. We have...
katlan
Settling crack been repaired by 6 people - any advice?
Our house is 25 years old. The foundation was put in...
BelfastBound
Ice damming !! Desperate for advice 911!!!
WE have severe ice damming on the roof of our home...
coffeemama1
Crawlspace floods with water, but it doesnt touch the wood, ok?
I have a crawlspace that is about 2 ft from the ground....
tlbean2004
Hubby and I disagree on who to call for cracks
So we keep arguing for like 5 years now (husband and...
dahoov2
© 2015 Houzz Inc. Houzz® The new way to design your home™