Horizontal Support for 4inch DWV pipe?

PT1968August 28, 2013

I have an open joist bay where i plan to run a 20' 4 inch DWV pipe. The Joist are TJI

What is the best way to support the so it remains with in the joist bay. I have steel been supporting the joist from below and do not want to run the pipe under the beam.

Is the hanger for this type of application or should i use the metal support tape and screw the tape to the bottom of the sub floor

I appreciate any ideas

Thank you for reporting this comment. Undo
snoonyb

Use metal tape screwed to the top rail or blocking nailed in the web. you'll only need 3 or 4 at the most.

    Bookmark   August 29, 2013 at 11:37AM
Thank you for reporting this comment. Undo
PT1968

Thx snoonyb it worked well

    Bookmark   September 4, 2013 at 9:07PM
Thank you for reporting this comment. Undo
snoonyb

And the price was right.

    Bookmark   September 5, 2013 at 11:40AM
Sign Up to comment
More Discussions
Popcorn Ceiling Removal...Is it worth it?
I have read many of the posts regarding Popcorn Ceilings...
cudjoegal
Shaker style question
What are y'all's opinions on Shaker style cabinetry....should...
janelor
Laying tile without cement board?
We pulled some tile up in several spaces. The tile...
nostalgicfarm
Removing brick and install what?
Just for the sake of discussion...if one was to remove...
mlo1
Bad Countertop Fabrication
Hello, Hoping to get some advice/opinions! We just...
diynola
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™