Vinyl Siding Outside Corner Installation

jimlaJuly 18, 2011

I am covering my 10ft 2inch high garden shed in vinyl. The outside corner channels I have are 10 feet long. In order to span the entire height, is there a particular way of joining two corner pieces besides using a butt joint? I noticed on my 25 year old home the corners were joined with pop rivets and an spline apparently. Its a south facing wall and will get hot. The pieces to join would be a 8 foot piece and a 2 foot plus piece.


Thank you for reporting this comment. Undo

Overlap the upper piece over the lower piece by cutting away 1" of the nailing flange of the top piece. Overlap 3/4", allowing a 1/4" gap between the nailing flanges for expansion.

    Bookmark   July 18, 2011 at 2:21PM
Thank you for reporting this comment. Undo


    Bookmark   July 20, 2011 at 12:06PM
Sign Up to comment
More Discussions
Joint Compound on Plaster Walls - Discoloration and bubbles?
We are having joint compound applied to our old plaster...
Questions about attic & insulation
1980's era house. Blown in FG insulation which at this...
Small bath remodel - problem tub size
I could use some advice. We decided it is high time...
What decisions, materials, can cut costs when remodeling?
If you really have a budget to work within, how do...
prairiemoon2 z6 MA
I live in BC, so I realize the answer may not be the...
Sponsored Products
Britax B-Safe Base - S875000
$64.00 | Hayneedle
Duravit 23.625-inch Vero White WGL Washbasin with Overflow
Oil-Rubbed Bronze Pull Down Kitchen Faucet
MR Direct Sinks and Faucets
Mr. Steam W348 Towel Warmer - Stainless Steel
Modern Bathroom
Home Decorators Area Rug: Saddlestitch Blue and Black 1' 8" x 3' 7"
$19.00 | Home Depot
Bardiglio Blend Big Brick Pattern
$15.99 | TileBar
Kichler Pro Series 1200W 12V Outdoor Magnetic Transformer
LBC Lighting
Madsen Corner Chair - Cordova Eclipse Gray
Joybird Furniture
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™