Iron doors

Nina123July 19, 2014

I am building a home in NJ and considering using double iron front entrance doors. I was wondering if anyone has experience with iron doors in this area and could recommend a good company. Also, I was concerned about possible condensation and rust issues. Any experience with this?

Thank you for reporting this comment. Undo
geoffrey_b

Iron doors? You mean iron bars? Are you in the ghetto?

    Bookmark   July 19, 2014 at 1:15PM
Thank you for reporting this comment. Undo
Nina123

lol!.. apparently you are not familiar with wrought iron doors!!.. they are actually very expensive and you likely wouldn't find them in the ghetto. Check out a website like abbyirondoors.com to see what I mean.

    Bookmark   July 19, 2014 at 1:22PM
Thank you for reporting this comment. Undo
dekeoboe

Do you mean doors with an iron insert? Or a solid iron door?

    Bookmark   July 19, 2014 at 5:57PM
Thank you for reporting this comment. Undo
Nina123

I mean a solid wrought iron door ... It would have a glass insert and decorative iron grills on it. Examples are at abbyirondoors.com... But I have no experience with the company.

    Bookmark   July 19, 2014 at 9:56PM
Thank you for reporting this comment. Undo
worthy

A residential iron door is not solid iron. It is, more accurately, a steel-clad door. That is, usually a polyurethane core clad in up to 14 gauge steel (1.897 mm thick). Of course, there are security doors and jailhouse doors and Hell's Angels' clubhouses that have a lot more steel. But that's probably not what we're discussing.

Iron door on Hells Angels Clubhouse, Toronto (before it was seized by RCMP/Metro Toronto Police Service)

This post was edited by worthy on Mon, Jul 21, 14 at 17:10

    Bookmark   July 21, 2014 at 5:00PM
Sign Up to comment
More Discussions
when and how to cut contractor loose?
We have been living a bathroom nightmare! All started...
BathroomBlues
Learning to read plans and drawings
We are embarking on the design phase for a remodel...
Susan Taylor Brown
Structural Engineer - What do I need to Know?
I'm planning a kitchen gut/remodel in my three-story,...
Carrie B
Laying tile without cement board?
We pulled some tile up in several spaces. The tile...
nostalgicfarm
Milgard SunCoat vs SunCoat Max vs I89 x-post
x-posted in Windows forum We're getting ready to remodel...
lisa_a
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™